Price change by region since February 2020
Change in the Producer Price Index for ready-mix concrete from February 2020 (just before the pandemic) to October 2026:
The Midwest saw the largest rise. Its prices barely moved in 2020, then rose 5.9% in 2021, 12.6% in 2022 and 11.2% in 2023. The South had the smallest overall rise and is the only region where prices fell in a calendar year, down 1.4% in 2025.
Year-by-year changes
Each year runs December to December. The 2026 column runs from December 2025 to October 2026.
| Region | 2021 | 2022 | 2023 | 2024 | 2025 | 2026 so far | Feb 2020 to Oct 2026 |
|---|---|---|---|---|---|---|---|
| Northeast | +4.0% | +9.4% | +8.7% | +3.5% | +3.7% | +1.6% | +36.7% |
| Midwest | +5.9% | +12.6% | +11.2% | +6.8% | +0.2% | +4.1% | +47.6% |
| South | +7.1% | +11.7% | +7.0% | +6.1% | −1.4% | +1.2% | +35.1% |
| West | +8.6% | +17.7% | +2.7% | +1.6% | +1.0% | +2.5% | +39.6% |
| United States | +6.7% | +13.3% | +6.9% | +4.8% | +0.1% | +2.2% | +39.1% |
2022 was the steepest year everywhere. The West rose 17.7% that year alone, then slowed sharply, with increases under 3% a year since. In the Northeast the index has stayed at the same level since March 2026.
Which states are in each region
The regions are the four U.S. Census Bureau regions:
- Northeast: Connecticut, Maine, Massachusetts, New Hampshire, New Jersey, New York, Pennsylvania, Rhode Island, Vermont.
- Midwest: Illinois, Indiana, Iowa, Kansas, Michigan, Minnesota, Missouri, Nebraska, North Dakota, Ohio, South Dakota, Wisconsin.
- South: Alabama, Arkansas, Delaware, District of Columbia, Florida, Georgia, Kentucky, Louisiana, Maryland, Mississippi, North Carolina, Oklahoma, South Carolina, Tennessee, Texas, Virginia, West Virginia.
- West: Alaska, Arizona, California, Colorado, Hawaii, Idaho, Montana, Nevada, New Mexico, Oregon, Utah, Washington, Wyoming.
The BLS does not publish a ready-mix price index for individual states. Pages that list a concrete price for every state are estimates, not official figures.
What this means for a project budget
These indexes track the price producers charge, not the final delivered price, but they show how far an old estimate is likely to be off. As a rough guide, concrete that cost $1,000 in early 2020 would cost about:
| Region | Same concrete, October 2026 |
|---|---|
| Northeast | $1,367 |
| Midwest | $1,476 |
| South | $1,351 |
| West | $1,396 |
| United States | $1,391 |
- Re-price old quotes. A concrete quote from 2020 or 2021 is likely 35–50% low, depending on your region.
- Get a current local price. Prices vary between suppliers in the same town. Enter your quote into the concrete cost calculator to price a slab, ready-mix or bagged.
- Order the right amount. The concrete calculator gives cubic yards with a waste allowance, so you pay for less leftover concrete.
For other materials, see how construction material prices have changed since 2020.
About the data
The Producer Price Index (PPI) measures the average change in prices that domestic producers receive for their output. The U.S. Bureau of Labor Statistics has published ready-mix concrete indexes for each Census region since January 2013. This page uses the industry series for ready-mix concrete manufacturing: Northeast (PCU327320327320A), Midwest (PCU327320327320B), South (PCU327320327320C), West (PCU327320327320D), United States (PCU327320327320). Values were retrieved from FRED on November 17, 2026.
The regional indexes and the national index use different base periods, so compare percentage changes, not index levels. All figures are not seasonally adjusted. The national change here (+39.1% to October 2026) uses the industry index; our material price page uses the closely related commodity index (+39.0% to August 2026).
Using these numbers
You're welcome to use the chart and tables in articles, reports or class materials. Please credit Free Construction Calculators with a link to this page, and cite the BLS as the original data source. We update this page when new data is released.