Cubic yards = square feet × depth in inches ÷ 324. At the usual 3 in, that is about 1 cubic yard per 100 sq ft, or 14 bags of 2 cu ft once you add 5% extra.

The three-step method
- Find the area of each bed in square feet. Measure in feet. Formulas for each shape are below.
- Multiply by the depth in feet. Divide the depth in inches by 12: 3 in is 0.25 ft. Square feet × depth in feet = cubic feet.
- Convert to what you're buying. Divide cubic feet by 27 for cubic yards (bulk), or by the bag size, usually 2 cu ft, for bags. Add about 5% for settling and uneven spreading.
The shortcut combines steps 2 and 3: square feet × depth in inches ÷ 324 = cubic yards, because 12 × 27 = 324.
How to measure each bed shape
Measure in feet. For inches, divide by 12 (6 in = 0.5 ft).
| Bed shape | Measure | Area formula | Example |
|---|---|---|---|
| Rectangle or square | Length and width | L × W | 12 × 4 ft = 48 sq ft |
| Circle | Diameter, across the middle | 3.14 × (D ÷ 2)² | 6 ft across = 28.3 sq ft |
| Ring around a tree | Outer diameter, and trunk diameter | 3.14 × (R² − r²) | 8 ft ring, 1 ft trunk = 49.5 sq ft |
| Half circle | Straight edge (the diameter) | 3.14 × (D ÷ 2)² ÷ 2 | 10 ft edge = 39.3 sq ft |
| Triangle (corner bed) | The two sides along the fences | A × B ÷ 2 | 8 × 8 ft = 32 sq ft |
| L-shaped | Split into two rectangles | (L₁ × W₁) + (L₂ × W₂) | 20 × 4 + 8 × 4 = 112 sq ft |
| Curved or kidney | Length, and width every few feet | L × average width | 18 ft long, average 4.5 ft = 81 sq ft |
For curved beds, run a tape along the longest line, then measure the width at 3–4 evenly spaced points and average them. It is accurate enough for mulch, since you are rounding up to whole bags or a whole yard anyway.
For a ring around a tree, you are not mulching under the trunk, so subtract it. Leave a few inches of bare ground around the trunk itself so mulch does not sit against the bark.
The square footage calculator handles rectangles, circles and triangles if you'd rather not do the arithmetic, and how to measure a room covers splitting awkward shapes into simple ones.
Quick chart: mulch by square footage
Already know your square footage? Read the amount off this chart. All figures include 5% extra.
| Area | 2 in deep (2 cu ft bags) | 3 in deep (2 cu ft bags) | 3 in deep (3 cu ft bags) |
|---|---|---|---|
| 50 sq ft | 0.32 yd³ · 5 bags | 0.49 yd³ · 7 bags | 5 bags |
| 100 sq ft | 0.65 yd³ · 9 bags | 0.97 yd³ · 14 bags | 9 bags |
| 150 sq ft | 0.97 yd³ · 14 bags | 1.46 yd³ · 20 bags | 14 bags |
| 200 sq ft | 1.30 yd³ · 18 bags | 1.94 yd³ · 27 bags | 18 bags |
| 300 sq ft | 1.94 yd³ · 27 bags | 2.92 yd³ · 40 bags | 27 bags |
| 500 sq ft | 3.24 yd³ · 44 bags | 4.86 yd³ · 66 bags | 44 bags |
| 1,000 sq ft | 6.48 yd³ · 88 bags | 9.72 yd³ · 132 bags | 88 bags |
Above about 1½ cubic yards, roughly 20 bags, bulk delivery is usually cheaper and quicker to spread. Bags of mulch in a yard compares the two and has a fuller coverage chart.
Worked example: a whole front yard
Three beds, mulched 3 in deep:
- Foundation bed, rectangle 12 × 4 ft: 48 sq ft
- Tree ring, 8 ft across around a 1 ft trunk: 3.14 × (4² − 0.5²) = 49.5 sq ft
- Curved border, 18 ft long, widths of 4, 5, 5 and 4 ft (average 4.5): 81 sq ft
Total area: 48 + 49.5 + 81 = 178.5 sq ft.
Cubic yards: 178.5 × 3 ÷ 324 = 1.65 yd³, or 1.74 yd³ with 5% extra.
Bags: 178.5 × 0.25 ft = 44.6 cu ft, plus 5% = 46.9 cu ft ÷ 2 = 24 bags of 2 cu ft.
At 1.74 yards, a single bulk delivery of 2 yards would cover it with a little to spare.
The mulch calculator takes rectangles and circles, adds several beds together and applies the 5% allowance for you, then shows yards and bags side by side.
Which depth to use
- 2–3 in for flower and shrub beds. This is what the charts above assume.
- 3–4 in if weed control is the main goal. Deeper than that can keep water and air from reaching roots.
- 1–2 in to top up last year's mulch. Measure what is already there before ordering a full depth.
Depth changes the order a lot: going from 2 in to 3 in needs 50% more mulch for the same bed.
Measuring tips
- Sketch the yard first and write each bed's measurements on it. It is easy to miss a bed or count one twice.
- Round measurements to the nearest half foot. Extra precision does not change how many bags you buy.
- Don't subtract small plants or shrubs. The mulch you save is less than the 5% allowance.
- Do subtract large hard areas inside a bed, such as a birdbath base, a stepping-stone path or a big boulder.
- Check the bag size. Most bags are 2 cu ft, but 1.5 and 3 cu ft bags are common, and the count changes a lot.
Frequently asked questions
How do I calculate how much mulch I need?
Multiply each bed's length by its width to get square feet, add the beds together, then multiply by the depth in inches and divide by 324. The result is cubic yards. For 2 cu ft bags, multiply square feet by the depth in feet and divide by 2.
How many square feet does a yard of mulch cover?
One cubic yard covers about 162 sq ft at 2 in deep, 108 sq ft at 3 in and 81 sq ft at 4 in.
How many bags of mulch do I need for 100 square feet?
About 14 bags of 2 cu ft at 3 in deep, or 9 bags at 2 in, including 5% extra.
How do I measure a curved flower bed for mulch?
Measure its length along the longest line, then measure the width at three or four points and average them. Multiply the length by the average width for the area.
How do I measure mulch for around a tree?
Measure the full diameter of the ring and the trunk. Work out the area of the large circle and subtract the trunk circle: 3.14 × (outer radius² − trunk radius²).
Should I buy extra mulch?
Yes, about 5%. Mulch settles and is never spread perfectly evenly, and a few spare bags cost less than a second trip or delivery.