Guide

How Much Does a Yard of Dirt Weigh?

A cubic yard of fill dirt weighs about 2,200 to 2,800 pounds, or 1.1 to 1.4 tons, depending on how wet it is. Topsoil is a little lighter, and sand and gravel are heavier. Below are the weights per cubic yard for common landscape materials, how many yards are in a ton, and how far a ton goes.

Quick answer

A cubic yard of fill dirt weighs about 2,200–2,800 lb (1.1–1.4 tons). Topsoil is lighter at about 2,000–2,400 lb, sand is about 2,700 lb dry, and gravel about 2,800 lb. Wet material weighs more.

Bar chart: typical weight of one cubic yard — topsoil about 2,100 lb, fill dirt 2,500 lb, sand 2,700 lb, gravel 2,800 lb, crusher run 3,000 lb
Typical weight of one cubic yard of each material as delivered. Moisture can add 15–25%.
Calculators for this guide

The short answer

  • Fill dirt: about 1.1–1.4 tons (2,200–2,800 lb) per cubic yard. About 0.8 cubic yards in a ton.
  • Topsoil: about 1.0–1.2 tons (2,000–2,400 lb) per cubic yard. About 0.9 cubic yards in a ton.
  • Sand: about 1.35–1.65 tons (2,700–3,300 lb) per cubic yard. About 0.74 cubic yards in a ton when dry.
  • Gravel: about 1.4–1.5 tons (2,800–3,000 lb) per cubic yard. About 0.7 cubic yards in a ton.

A cubic yard is a 3 ft × 3 ft × 3 ft cube, or 27 cubic feet (see how many cubic feet are in a cubic yard). Suppliers sell soil by volume (yards) and stone often by weight (tons), which is why you need both numbers.

Weight per cubic yard and yards per ton

Typical weights for loose material as delivered. A short ton is 2,000 lb, the ton US landscape suppliers use.

MaterialTons per yd³Pounds per yd³Yards per tonNote
Fill dirt, dry1.12,200 lb0.91Loose, unscreened soil
Fill dirt, moist1.252,500 lb0.80Typical as delivered
Clay or wet soil1.42,800 lb0.71Heavy after rain
Screened topsoil, dry12,000 lb1.00Low end; some yards weigh 1.1
Topsoil, moist1.22,400 lb0.83Typical spring delivery
Garden soil / compost blend0.91,800 lb1.11Lighter organic mix
Sand, dry1.352,700 lb0.74Mason or play sand
Sand, damp1.53,000 lb0.67Most stockpiled sand
Sand, wet1.653,300 lb0.61Saturated
Pea gravel1.42,800 lb0.713/8 in rounded stone
Crushed stone #571.422,840 lb0.703/4 to 1 in angular
Crusher run / road base1.53,000 lb0.67Stone plus fines
River rock1.352,700 lb0.74Rounded, 1 to 3 in
Decomposed granite1.32,600 lb0.77Fine granite
Lava rock0.51,000 lb2.00Very light, porous

These are planning figures. The weight of the same material varies by quarry, moisture and how finely it is screened, so ask your supplier for their conversion factor if you are ordering by the ton.

Why the same yard can weigh different amounts

Three things change the weight of a cubic yard:

  • Moisture. Water fills the gaps between particles. Damp sand weighs around 3,000 lb a yard, against 2,700 lb dry. Soil delivered after rain can weigh 15–25% more than the same soil in a dry spell.
  • Particle size and shape. Crusher run, a mix of stone and fine dust, packs tighter than single-size pea gravel, so a yard of it is heavier. Lava rock is full of air pockets and weighs about a third as much as other stone.
  • Organic content. Topsoil and compost blends contain decomposed plant matter, which is light. The more organic matter, the less a yard weighs.

Compaction works the other way round: a yard of loose fill shrinks once it is tamped, so you need more loose material than the finished volume. The dirt calculator lets you add an allowance for this.

How to convert yards to tons (and back)

Use the density from the chart:

  • Tons = cubic yards × tons per yard. 5 yd³ of pea gravel × 1.4 = 7 tons.
  • Cubic yards = tons ÷ tons per yard. 3 tons of dry sand ÷ 1.35 = 2.2 yd³.

To get the cubic yards in the first place, multiply length × width × depth in feet and divide by 27.

Worked example — topsoil for a garden bed. A 10 × 12 ft bed filled 6 in deep: 10 × 12 × 0.5 = 60 ft³ ÷ 27 = 2.22 yd³. At 1.1 tons per yard that is about 2.4 tons of topsoil.

Worked example — gravel driveway. A 12 × 40 ft driveway topped up 4 in deep: 12 × 40 × 0.333 = 160 ft³ ÷ 27 = 5.93 yd³. At 1.4 tons per yard that is about 8.3 tons of gravel.

Rule of thumb

Soil: about 1.1–1.25 tons per yard. Sand and gravel: about 1.4 tons per yard. A ton of gravel is roughly ¾ of a yard.

The topsoil, sand and gravel calculators do both steps and show yards and tons together.

How far does a ton go?

Area one ton covers at common depths:

Material (1 ton)2 in deep3 in deep4 in deep
Fill dirt, moist130 sq ft86 sq ft65 sq ft
Screened topsoil, dry162 sq ft108 sq ft81 sq ft
Sand, dry120 sq ft80 sq ft60 sq ft
Pea gravel116 sq ft77 sq ft58 sq ft
Crushed stone #57114 sq ft76 sq ft57 sq ft
Crusher run / road base108 sq ft72 sq ft54 sq ft

So a ton of gravel covers roughly 116 sq ft at 2 in, but only about 58 sq ft at the 4 in typical for a driveway top-up. For a full driveway build with base and top layers, see gravel driveway layers explained.

Can you haul it yourself?

Weight is usually what limits a pickup, not bed space. Approximate load weights:

VolumeFill dirt (moist)TopsoilSand (dry)Gravel
1 yd³1.25 tons1.1 tons1.35 tons1.4 tons
2 yd³2.5 tons2.2 tons2.7 tons2.8 tons
5 yd³6.25 tons5.5 tons6.75 tons7 tons
10 yd³12.5 tons11 tons13.5 tons14 tons
15 yd³18.75 tons16.5 tons20.25 tons21 tons
  • One cubic yard of moist fill dirt is about 2,500 lb, which is at or over the payload of many half-ton pickups. Check the payload figure on the sticker in your driver's door jamb before loading.
  • Half a yard of gravel or sand is a safer load for a typical half-ton truck.
  • For more than 2–3 yards, delivery by dump truck is usually cheaper than several trips once you count fuel and time.

Ordering tips

  • Order by the unit your supplier sells. If they price by the ton, convert your cubic yards to tons with the chart above, and ask for their own factor for that material.
  • Add 5–10% for soil and gravel. Material settles and spreads unevenly, and running short means a second delivery fee.
  • Ask about moisture. Some yards sell sand and soil by weight after rain. You pay for the water.
  • Bags are sold by volume. A 0.75 cu ft bag of topsoil is 1/36 of a cubic yard, so a yard is 36 bags. Bulk is usually cheaper above about 1 yard.

Frequently asked questions

How many yards of dirt are in a ton?

About 0.8 cubic yards of moist fill dirt make a ton, since a yard weighs about 1.25 tons. Dry topsoil is lighter, at roughly 0.9–1 cubic yard per ton.

How many yards are in a ton of gravel?

About 0.7 cubic yards. Most gravel weighs around 1.4 tons per cubic yard, so 1 ton ÷ 1.4 ≈ 0.71 yd³. Crusher run, at about 1.5 tons per yard, is closer to 0.67 yd³ per ton.

How much does a yard of sand weigh?

Dry sand weighs about 2,700 lb (1.35 tons) per cubic yard. Damp sand is about 3,000 lb and fully wet sand about 3,300 lb.

How much does a yard of topsoil weigh?

Screened topsoil weighs roughly 2,000–2,200 lb (1.0–1.1 tons) per cubic yard when dry, and about 2,400 lb when moist.

How many tons is 10 yards of gravel?

About 14 tons, using 1.4 tons per cubic yard. Crusher run would be about 15 tons.

Is a yard of dirt too heavy for a pickup?

Often, yes. A cubic yard of moist fill dirt weighs about 2,500 lb, which exceeds the payload of many half-ton pickups. Check the payload rating on your door-jamb sticker, or haul half a yard at a time.

Published November 19, 2026. This guide is general information — check local codes and product instructions for your project.

Calculators used in this guide

More guides