Quick answer
- Most 4x4 posts: 2 bags of 80 lb concrete. That covers the standard 10-inch hole, 24–30 inches deep.
- Gate posts and tall privacy fences: 3–4 bags of 80 lb. A 12-inch hole at 30–36 inches deep takes roughly double the concrete of a 10-inch hole.
- 50 lb fast-setting bags: 3–4 per post for the same standard hole — the bag is smaller, so the count is higher, not the concrete.
The hole size decides the count, not the post. Widening a hole from 10 to 12 inches adds about half again as much concrete at the same depth, because the volume grows with the square of the diameter.
Bags per post chart — 4x4 posts (actual 3.5 in square)
Bag counts are rounded up per post — you cannot buy part of a bag. Volumes are the hole minus the buried post, filled to ground level, with no waste buffer added (see the buffer note below).
| Hole diameter × depth | Concrete | 80 lb bags | 60 lb bags | 50 lb bags |
|---|---|---|---|---|
| 8 in × 24 in | 0.53 cu ft | 1 | 2 | 2 |
| 8 in × 30 in | 0.66 cu ft | 2 | 2 | 2 |
| 8 in × 36 in | 0.79 cu ft | 2 | 2 | 3 |
| 10 in × 24 in | 0.92 cu ft | 2 | 3 | 3 |
| 10 in × 30 in | 1.15 cu ft | 2 | 3 | 4 |
| 10 in × 36 in | 1.38 cu ft | 3 | 4 | 4 |
| 12 in × 24 in | 1.40 cu ft | 3 | 4 | 4 |
| 12 in × 30 in | 1.75 cu ft | 3 | 4 | 5 |
| 12 in × 36 in | 2.10 cu ft | 4 | 5 | 6 |
Bags per post chart — 6x6 posts (actual 5.5 in square)
A 6x6 post displaces more concrete than a 4x4, so it needs slightly fewer bags in the same hole.
| Hole diameter × depth | Concrete | 80 lb bags | 60 lb bags | 50 lb bags |
|---|---|---|---|---|
| 12 in × 30 in | 1.44 cu ft | 3 | 4 | 4 |
| 12 in × 36 in | 1.73 cu ft | 3 | 4 | 5 |
| 12 in × 42 in | 2.01 cu ft | 4 | 5 | 6 |
Bag yields
| Bag size | Yield per bag | Bags per cubic yard |
|---|---|---|
| 40 lb | 0.30 cu ft | 90 |
| 50 lb | 0.375 cu ft | 72 |
| 60 lb | 0.45 cu ft | 60 |
| 80 lb | 0.60 cu ft | 45 |
Check the yield printed on the bag you buy — fast-setting and high-strength mixes can differ slightly from these standard figures. Past about a cubic yard (45 bags of 80 lb), ready-mix delivery is usually the sensible option instead of bags. For bigger pours, see how many bags of concrete you need for slabs, and how much a concrete slab weighs if you need the weight for hauling.
How the numbers are worked out
Concrete per post = hole volume − post volume, divided by the bag yield.
Worked example — a 4x4 post in a 10-inch hole, 30 inches deep:
- Hole volume = π × 5² × 30 = 2,356 cubic inches.
- Post volume = 3.5 × 3.5 × 30 = 368 cubic inches. (A nominal 4x4 measures 3.5 inches each way.)
- Concrete = 2,356 − 368 = 1,989 cubic inches = 1.15 cubic feet (divide by 1,728).
- Bags = 1.15 ÷ 0.60 = 1.92 → 2 bags of 80 lb. Or 1.15 ÷ 0.375 = 3.07 → 4 bags of 50 lb.
What size hole to dig
- Diameter: about 3 times the post width — 10–12 inches for a 4x4, 12 inches for a 6x6. The auger size you own often decides this: 10- and 12-inch augers are the common ones.
- Depth: about one-third of the fence height above ground, and below the local frost line in cold climates. A 6-foot fence usually means a 30-inch hole; a 4-foot fence can sit in 24 inches.
- Gravel base: many installers put 4–6 inches of gravel at the bottom for drainage. That gravel displaces concrete — a 10-inch hole 30 inches deep with 6 inches of gravel needs about 0.92 cu ft instead of 1.15 cu ft, still 2 bags of 80 lb. The chart above assumes no gravel base; if you use one, the counts stay the same for the standard holes and drop by at most one bag on the deepest ones.
- Top of the concrete: stop 3–4 inches below ground level and finish with soil, or bring the concrete to grade and slope it away from the post so water does not pool against the wood.
A note on the buffer — why other charts say 3 bags where this one says 2
Some guides add a 10% waste buffer before rounding up, which pushes borderline holes over the line: the 10-inch × 30-inch hole is 1.15 cu ft (2 bags of 80 lb exact), but 1.27 cu ft with a 10% buffer (3 bags). Both are honest — they just make different assumptions about dug holes, which are never perfect cylinders.
The practical rule: use this chart for the per-post count, multiply by your post count, then add one extra post's worth of bags (or about 10%) at the end for the whole run — not per post. Rounding up per post on a 20-post fence can leave you with a dozen spare bags.
How many bags for a whole fence
Example — 100 feet of fence, posts every 8 feet, 4x4 posts in 10-inch holes 30 inches deep:
- Posts: 100 ÷ 8 = 12.5 → 13 posts (including the end post).
- Concrete: 13 × 1.15 cu ft = 14.96 cu ft.
- 80 lb bags: 14.96 ÷ 0.60 = 24.9 → 25 bags exact, buy 27–28 with the buffer (one spare post's worth, plus a little extra).
- 50 lb fast-setting bags: 14.96 ÷ 0.375 = 39.9 → 40 bags exact, buy 43–44 with the buffer.
Gate posts need their own count — a gate post in a 12-inch hole 36 inches deep takes 4 bags of 80 lb, not 2, so add those separately.
Common mistakes
- Buying “two bags per post” for every hole. It is right for a 10-inch hole and wrong for a 12-inch gate-post hole, where you will be short by half.
- Forgetting the post displaces concrete. The hole volume alone overstates the concrete by about 15% on a 10-inch hole — enough to matter across a whole fence.
- Rounding up per post. Multiply the exact per-post figure by the post count, then round up once at the end.
- Setting the post in a hole that is too shallow. Depth below the frost line matters more than an extra bag of concrete — a shallow post heaves in winter no matter how much concrete surrounds it.
- Pouring concrete to the top of the hole around a wood post. Finish 3–4 inches low with soil, or slope the concrete away from the post, so water does not sit against the wood.
FAQ
How many bags of concrete per fence post?
Most 4x4 posts need 2 bags of 80 lb concrete in a 10-inch hole 24–30 inches deep, or 3–4 bags of 50 lb fast-setting mix. Gate posts in 12-inch holes need 3–4 bags of 80 lb.
How many 80 lb bags of concrete per 4x4 post?
Two, for the standard 10-inch hole up to 30 inches deep. Three if the hole is 12 inches wide or 36 inches deep, four for a 12-inch hole at 36 inches.
How many 50 lb bags of concrete per fence post?
Three for a 10-inch hole 24 inches deep, four for the same hole at 30 inches deep. A 50 lb bag yields 0.375 cu ft, against 0.60 cu ft for an 80 lb bag.
How deep should a fence post hole be?
About one-third of the fence height above ground — 30 inches for a 6-foot fence — and below the local frost line. Check your local code; frost depth overrides the rule of thumb.
How wide should a fence post hole be?
About three times the post width: 10–12 inches for a 4x4, 12 inches for a 6x6.
Do I need gravel under a fence post?
It helps drainage — 4–6 inches of compacted gravel at the bottom keeps the post out of standing water. It displaces a little concrete but does not change the bag count for standard holes.
Ready to estimate? Enter your fence length and post spacing in the fence calculator for posts, rails and pickets, then use the concrete calculator for cubic yards and bag counts for the post holes.